Beskrivelse
Vår S-19 CO2 Sensor er godt egnet til kontinuerlig sanntidslogging av CO2 nivåer i bygninger.
Som alle våre sensorer blir data sendt via gateway til internet. Dette kan leses av i sanntid via en enhet med nettleser.
CO2 er en god indikator på feks. hvor godt en bygnings ventilasjonssystem fungerer. Sensoren er selvkalibrerende.
- Range 0-2000 PPM with resolution down to 1 PPM
- Accuracy – At 72°F (22°C) when compared against a certified factory reference ± 40 ppm + 3% of reading
- Temperature Dependence – 0.2% FS per °C
- Stability – < 2% of FS over life of sensor (15 year typical)
- Non Linearity – < 1% of FS
- Pressure Dependence – 0.135 of reading per mm Hg
- Calibration Interval – Calibration not required
- Response Time – < 2 minutes for 90% step change typical
- Warm up time – < 2 minutes (operational), 10 minutes (maximum accuracy)
- Operating conditions – 32°F to 122°F (0°C to 50°C), 0 to 95% RH, non condensing
- Over The Air updates of
- Firmware
- Configuration, including sample period (ie time between samples)
- Powered from AC adapter, 100-240 VAC in, 3.3 VDC out
- data can be graphed against data from any other OmniSense sensor or sensor(s)
- alarm emails when measured CO2 value exceeds high or low thresholds or returns to normal range.
- FCC/CE approved
- Automatic Background Logic, or ABC Logic, is a patented self-calibration technique that is designed to be used in applications where concentrations will drop to outside ambient conditions (approximately 400 ppm) at least 3 times in a 14 day period, typically during unoccupied periods.
- Compact and wireless makes for an easy installation.
Comes with:
- AC Adapter
Requires:
- OmniSense Gateway
- OmniSense Monitoring Account